How can we help?

You know how to use a sticker? Well, it’s pretty much the same deal...with a few essential details to keep in mind!

Use TILE STICKERS to cover up tiled surfaces. 


 The goal of tile stickers is to give your existing tiles a facelift, so you’ll need to choose stickers that are the same size as your tiles. Keep in mind, each sticker is designed to cover the tile only, leaving the grout uncovered. 

Use these tips to make sure your stickers don’t peel up at the corners: 

  • Make sure all four sides of the sticker will sit on the flat tile. A 1-2 mm gap between your tile and tile sticker is considered normal for a perfect application
  • Sticker edges should not hang over the tile edge or cover a rounded tile edge
  • Stickers should not be placed over grout unless the grout is level with your tile and no wider than 3 mm

DO NOT use tile stickers to cover non-tiled surfaces.

We do not recommend using tile stickers to cover non-tiled surfaces, such as smooth floors or walls. Here’s why:

  • Lining them up perfectly, with no gaps or overlapping, is a pain (and nearly impossible)! 
  • The final effect will not have grout lines
  • Stickers may peel up at the corners over time

So, can you use Quadrostyle stickers if you don’t already have tiles? 

Yes, but NOT tile stickers. Tile stickers are not vinyl tiles and are therefore not intended to be used in the same way. For long-wearing results on smooth surfaces, please use our floor panels (for floors) or wall panels (for walls or backsplashes).

Use FLOOR PANELS to cover smooth floors/Use WALLPAPER to cover smooth walls. 

Here’s what you need to know about floor panels and wallpaper:

  • Made from the same material as the tile squares
  • These are really big sheets of adhesive vinyl that join up invisibly at printed grout lines
  • With fewer joins and a smoother surface, you will have an easy-care surface that will last much longer

Everything! We’ve put so much love, effort, and elbow grease into engineering the best tile stickers we could possibly dream up. 

Quadrostyle stickers are made of a durable, adhesive-backed vinyl film that can stand up to almost anything that comes their way. They’re also laminated to improve longevity—protecting them from fading, scratching, and wearing out from the weather. But that’s not all that makes our product special...

Here are more factors that set Quadrostyle stickers apart:

  • Top-Tier Manufacturing – Using the most cutting-edge printing technology
  • Quality Vinyl – Our vinyl stock (20 mils) is as thin as a playing card and top-of-the-line
  • Durable – Printed with solvent ink and a UV matte laminate finish (3 mils) that can stand up to your family's daily wear and tear
  • Colorful & Unique – Printed in full-color CMYK, allowing us to print all kinds of designs, from vector artwork to paintings and illustrations
  • Easy to Install – Our low-tack, re-adjustable adhesive backing makes them a breeze to install*
  • Renter-Friendly – Guaranteed not to damage the existing surface and easy to remove
  • Steam & Splash-Resistant – Perfect to use in bathrooms, kitchens, as a backsplash or behind your stove
  • Weather-Proof – Resistant to rain and sun
  • Fade-Free – For up to five years
  • Adaptable – Available in six sizes and two scales

*Quadrostyle stickers are repositionable but not designed to be reapplied

Quadrostyle Stickers will stick to:

  • Smooth ceramic wall and floor tiles
  • Drywall painted in a satin or gloss paint
  • Laminated surfaces (e.g. Formica, melamine, IKEA furniture)
  • Linoleum, vinyl, and laminate flooring
  • Parquet and varnished wood
  • Sealed concrete
  • Sealed polished stone (e.g. granite, marble, terrazzo)
  • Glass
  • Metal
  • Plastic
  • Acrylic
  • Perspex

Quadrostyle Stickers won't stick to:

  • Rough or textured wall and floor tiles
  • Irregular edged tiles or pocked surfaces (e.g. handmade tiles, tumbled marble)
  • Drywall painted in a matte, velour, or chalk finish 
  • Cracked paint
  • Old wallpaper
  • Unsealed subflooring, unsealed plywood, or raw wood
  • Waxed or oiled wood paneling
  • Unsealed concrete or stone tiles 
  • Ceramic tiles with a wax coating
  • Cork or any other porous surface
  • Damp or cracked surfaces 
  • Brick
  • Slate

Got textured surfaces you want to cover up? There’s still hope!

To learn how to covered textured walls with Quadrostyle stickers, check out our blog article, How to Cover Textured Walls With Stick-On Vinyl Wallpaper.

The short answer is “about as thick as a playing card.” But if you want to get all technical, the answer is 23 mils thick. That’s 0.023 inches or a little more than half of a millimeter.

A mil is a unit of measurement used to measure paper thickness. It is equal to one-thousandth of an inch. Our tile stickers are made from 20 mil adhesive vinyl and coated in 3 mils of protective laminate. Other cheaper tile stickers on the market use vinyl that is only 13 mils thick.  

For reference, here are some examples of common paper thickness:

  • Photo film – 7 mil
  • Printer paper – 8 mil
  • Traditional glossy photo paper – 10 mil
  • Cardboard – 22 mil

You sure can! Our wallpaper and backsplash panels will not suffer behind your cooker. Just make sure your gas stove flame is at least 4" away from the wall.

Tile Stickers can be used in front of the stove

Indeed you can!

For tiled showers: Give your old shower tiles a glow-up with matching-sized tile stickers and leave the grout exposed. 

Tile stickers can be used on shower walls

If we don't offer your size, no problem! Send us your tile size via our custom order form, and we'll send you a quote.

We do not recommend covering over your tile grout with stickers. Water droplets may seep in between, causing the stickers to peel off.

For acrylic shower cubicles & drywall: Give your shower a splash of personality using our peel & stick wallpaper. When covering drywall, make sure your walls are painted in a satin or gloss finish first.

IMPORTANT: Do not install our stickers on the shower floor as they do not like being soaked.

No need to panic!

Vinyl tile stickers are water-resistant, so a little splish-splash won’t hurt ‘em. 

They can get pretty slippery when wet, though. To prevent turning your floors into a slip-n-slide, use a bath mat or cotton runner in areas where water might splash onto them.

NOTE: Although Quadrostyle stickers can withstand the occasional splash, they do not wear well when left sitting in water. The water may eventually seep under the surface and unstick the adhesive. Do not install them on shower floors, poorly-draining balconies, or on damp or moldy surfaces.

We get it, you want your fireplace to look as sizzling hot on the outside as it is on the inside.

As long as your fireplace surround doesn't get hot, our tile stickers can transform it into the centerpiece of your lounge room.

Tile stickers can be used to cover the fireplace surround

To learn the best method for covering up your fireplace surround:

Well, it depends. While tile stickers can resist rain and fading from the sun, those aren’t the only elements you need to consider when installing tile stickers outdoors.

Before installing Quadrostyle stickers outside, make sure your space meets the following criteria:

  • The surface you intend to cover with stickers must be waterproof
  • The area must not be subject to snow, ice, or puddles of water
  • It is not exposed to high heat or intense direct sunlight, which will soften the adhesive backing making them easy to peel off
  • It is not subject to extreme temperature changed, which can cause up to 2% shrinkage

Examples of outdoor spaces where tile stickers may be acceptable include a covered patio, a covered concrete balcony, concrete stair risers, or entryway tiles on a porch.

We know how frustrating it can be for renters to create a home that reflects your personality and your sense of style. Bland, boring walls and ugly, utilitarian flooring may be practical for landlords but can be prison-like for the people actually inhabiting the space.

Fear not, renters, we’ve got good news for you: Quadrostyle stickers are removable, repositionable, and renter-friendly!

Thanks to low-tac adhesive, our stickers peel easily, stick smoothly, and remove cleanly. Leave them on for the duration of your lease or rental period, then peel them off when you’re ready to move out.

If they give you some resistance during removal, try warming the stickers for a few seconds with a hairdryer to soften the adhesive before pulling them off. Any gummy residue can be wiped away with soap & water.


Didn’t we say installation was a breeze? Our products are pre-cut and ready to install!

Tile sticker packs are available in five sizes to match your existing tile size. All you have to do is peel off the backing and stick.

Wallpaper and Floor Panels are just larger stickers and are only available in one size: 24” x 48” (60 x 120 cm). When installed correctly, the pattern is seamless. Join panels at the printed grout line. Upon receiving your goods and before you install, study the panel edges to see the pattern repeat.

Stair riser packs are offered in six heights and come pre-cut into strips 48" (120 cm) long :

12.70 cm

14 cm

15.24 cm

16.50 cm

17.70 cm

19 cm

Yes, yes, and YES. Quadrostyle stickers are lightweight and easy-to-install, making them perfect for RVs! We’re not the only ones that think so—just browse through our tagged photos on Insta, and you’ll find plenty of RV owners who have given their tiny homes the Quadrostyle treatment.

Our stickers are ideal for making over dated RV kitchens & bathrooms. Use our vinyl splashbacks on Formica cabinets and laminate walls. To cover old linoleum flooring, use our floor panels. You can even transform your toilet with our vinyl wallpaper!

NOTE: The key to a successful installation is the interior temperature. Ensure your RV is insulated before applying Quadrostyle stickers.

For those that do not live in your camper all year round, keep in mind that trapped high heat will weaken the adhesive backing, causing stickers to fall off your walls. It is, therefore, important to maintain a regular ambient temperature or to park your camper in the shade when not in use.


Think about it as perfection in imperfection. 

Quadrostyle specializes in creating tile stickers that look like real cement tiles. That means mimicking weathered cement, hand-painted details, and other irregularities that come from artisan craftsmanship. 

Thankfully, we’ve got a seriously talented graphic artist on our team that has designed special aging effects to get the job done. When you stand back and admire your tile stickers, you, and you alone, will know that they're not real.

When installing your tile stickers, be sure to turn some clockwise and anticlockwise, so the effect is evenly spread out.

Patchy areas, faded tones, and uneven backgrounds are all intentional and are not considered print defects. If you would prefer a uniform color, please place a custom order.

These babies are seriously durable. As a matter of fact, the material we print on was originally developed to be used for outdoor signage, vehicle wraps, stadiums, and points of purchase for retail stores and malls.

We’ve simply taken this material, printed our fabulous designs on it, and reinforced it with heavy-duty laminate. That way, our stickers can stand up to high-traffic floors and even wet areas. Dirt and debris clean up easily with a damp mop, making them perfect for a kitchen, bathroom, laundry room, pantry, rental home, or office.

When correctly installed on a suitable surface, here’s what you can expect:

  • On the floor: With a little care, our floor stickers can last over two years. Keep a few extra tile stickers or panels on hand so you can replace damaged stickers with new stickers as necessary. Alternatively, you can coat floor stickers with an epoxy sealer to make them last forever.
  • On walls and stair risers: These will last indefinitely.

PRO TIP: If you want to slide furniture over floor stickers, make sure you have felt pads on all the table and chair legs. Otherwise, the stickers may tear and peel up. Stepladders and kitchen stools with metal feet will also gouge the stickers if pushed across. 

Finally, install floor stickers LAST and after ALL renovations are complete. Install all white goods and bulky furniture before installing floor stickers.

Are you a DIY debutante? Well, you’re in luck because installing Quadrostyle stickers is easy-peasy-lemon-squeezy. Seriously, this is the simplest way to transform your home. No prior experience needed, and no expensive tools required. 

Just peel off the backing and smooth the sticker in place. Then, if necessary, trim with a pair of scissors or a sharp blade. Because they're repositionable, they're very forgiving. You can re-stick them over and over.

Here are the basics you need to know about applying stickers:

  • To apply, simply bend over a corner of a sticker and peel it off its backing. Then, smooth over the surface with a dry cloth or credit card to remove any air bubbles.
  • Tile stickers can be trimmed with a pair of scissors or a utility knife to fit into corners or around switches.
  • Using felt pads or discs under furniture will protect stickers from tearing, prolonging the life of your new floor.
  • PLEASE DO NOT INSTALL YOUR TILE STICKERS DURING RENOVATIONS. Apply stickers only after renovations are complete. Our stickers are not designed to cope with tradesmen, ladders, power tools, or water damage caused by plumbing renovations. The surface can tear from sharp edges of ladders or from pushing heavy items across the surface. Stickers that are subject to water leaks will peel off. Once all the heavy-duty work is done, add Quadrostyle stickers as a final touch!

We know our tile stickers look like real tiles, but alas, they are a mere 1 mm thick and only designed to cover the surface beneath. So, no, you can’t grout them.

When installing your wallpaper or stickers around the bath or the shower recess it's a good idea to add a line of caulk along the raw edges to prevent water seeping under. 

Not only does it add a barrier but the clean white line will make your application look professional.

Cut tiles should be covered with a tile sticker trimmed to size. Trim the sticker with a pair of scissors or a sharp blade. Always make sure to match the pattern to the tile next to it.

When calculating your order needs, count each cut tile as one tile sticker.

Yuck! No one likes dirty grout. Even with brand new, beautiful tile stickers, your surface is going to look sub-par if the grout between each of the stickers is stained and worn out.

For every problem, of course, there is a solution! In this case, it’s a magical elixir called “grout refresh.” Grout refresh products are readily available at most hardware stores and shouldn’t cost you too much. 

Another option is to paint the edges of the tiles and the grout with white tile paint. This solution is permanent, but it’ll definitely make your stickers pop.


Want your stickers to go the distance? Then prep work is essential. Here are a few tips to consider before installing stickers:

Clean your surface ‘til it’s spic and span: Clean your existing surface by removing all traces of dust, grease, and soap residue. This will ensure ideal adhesion. We recommend giving your floor or tiled wall a good scrub using a scourer sponge and multi-purpose kitchen/bathroom spray. Make sure your tiles are entirely clean and dry before you begin applying your tile stickers.

Watch out for wax: Certain floor tiles have a factory-applied waxy coating to protect them during shipment. In some cases, this coating is not removed after installation. This is bad news if you’re planning to install tile stickers, as the wax will repel the adhesive. We recommend you remove the coating with an acidic abrasive cleanser.

Say goodbye to matte: If installing on walls, ensure the paint finish is satin or gloss. Matte paint will not offer long term results. If you need to repaint your wall, please allow one week for the paint to cure before applying your stickers.

So you’re stickering your bathroom floor and it’s smooth sailing. You’re peeling, you’re sticking, you’ve found your rhythm. But then you get to the toilet and panic sets in. What do you do now?!

There’s no doubt that the toilet is the one of the most complicated spots in the home for installing tile stickers. Trimming each sticker in advance to match the curves in the base requires precision, and it’s easy to make a mistake.

So, avoid the risks and do it our way instead:

- First, peel off only part of the sticker backing and align the sticker with your tile.

Apply as much of the sticker as you can until you reach the toilet base, then trim off the excess backing.

- Next, make an incision toward the base of your toilet.

- Then, wrap the sticker around the toilet while continuing to make cuts toward the base.

Once the tile around the toilet is covered with your sticker, take a razor blade or utility knife and cut off the excess sticker.

Here’s a video tutorial to help you better visualize the process:


Eager to vamp up your stairs, but not sure where to begin? We get it, ordering can be tricky, especially when it comes to ensuring you’ve ordered the right amount of the right size stickers. To simplify things, we’ve broken down the ordering process into a few easy steps. So, grab your measuring tape and follow the instructions below!

Step 1: Count how many risers you have

Step 2: Measure the height of each riser

Step 3: Choose your favorite pattern here

Step 4: Decide if you need a pack of 6 or individual strips

Tip: If you have 9 stair risers, order a pack of 6 in the closest height to your risers and then add the balance by ordering 3 more individually.

In the "Special instructions to seller " section write the height of the individual risers.

Important: All stair risers are 48" long and can be joined to create longer strips.

Place a custom order here if we don't offer your stair riser height.

Floor panels are the largest stickers we offer, designed to cover smooth floors. They are ideal to use on linoleum, vinyl floor tiles, sealed concrete, varnished wood, or laminate floors.

Floor panels are sold individually and join up at the printed grout lines for a seamless finish. At 24" x 48", each panel covers 8 sq. ft.

For a long-wearing, easy-care floor, we recommend using floor panels rather than a lot of smaller squares. It will save you a whole lot of time and trouble!


Unfortunately, no.

Our wallpaper is not coated with protective laminate needed to withstand the daily moving and grooving of your home. So, no, we don't recommend them on the floor. 

However, we do offer floor panels, which are essentially like wallpaper for your floor. They even come in the same size panels. Floor panels do come with a protective laminate and are specifically designed to take foot traffic.

It depends on the wall. Is it smooth or tiled?

Painted drywall and other smooth surfaces: If your walls are smooth, such as drywall painted in a satin or gloss finish or another polished material, we recommend our wallpaper or splashbacks. These large sticker panels offer a seamless finish, fewer joins, and a smooth, easy-to-clean surface.

Tiled walls: For tiled walls, we recommend covering each individual tile with an identically-sized tile sticker. We offer five sizes but can easily create any custom size larger than 2". If the grout on your walls is thin and nearly level, you may also use wallpaper panels.

NOTE: We do not recommend covering grout that is wider than 3 mm or that dips from the surface level. The grout lines will show through as a relief on the vinyl sticker. The uneven surface also makes it more difficult to align the pattern. Finally, because grout is porous, moisture and debris may get between the sticker, causing it to weaken and peel off.

It depends on the floor. Is it tiled or smooth?

Smooth floors: If your floors are smooth, such as linoleum, polished stone, sealed concrete, or varnished parquet, we recommend our floor panels. These large sticker panels offer a seamless finish, fewer joins, and a smooth, easy-to-clean surface.

Tiled floors: For tiled floors, we recommend covering each individual tile with an identically-sized tile sticker. We offer five sizes but can easily create any custom size larger than 2". If the grout on your floors is thin and nearly level, you may also use floor panels.

NOTE: We do not recommend covering grout that is wider than 3 mm or that dips from the surface level. The grout lines will show through as a relief on the vinyl sticker. The uneven surface also makes it more difficult to align the pattern. Finally, because grout is porous, moisture and debris may get between the sticker, causing it to weaken and peel off.

First of all, are you sure which product is right for your surface? 

Before you begin worrying about product sizes, you should be 100% sure you’re using the best product for your project. For example, you wouldn’t want to use tile stickers on a smooth floor. Verify which product you should use by heading to the FAQ section “How do I choose which product to order?”

Once you are 100% sure which product to order, it’s time to talk sizes.  

Tile Stickers We offer our tile stickers in five sizes. Choose the size that matches your tiles or, if your tile size is not offered, place a custom order for a perfect fit. We do not recommend trimming the stickers more than a few millimeters  as you may lose the pattern repeat. Cutting the sides perfectly straight requires precision and a very sharp blade best done in house by our team.

Sticker Panels (Wallpaper/Floor Panels/Splashbacks): We offer 24" x 48" (60 x 120 cm) panels for smooth surfaces. We do not recommend using these on tiled surfaces with deep grout. If you've got a mosaic tiled floor and are in a real spot and desperate to cover them up then use our floor panels to cover the lot. You may note the relief of tiles through the sticker so be sure to choose a busy pattern to disguise them.

In the past our packs contained 24 stickers, however for many that was too many leftovers. We get it!

Today each pack contains 8 stickers. This is the minimum order.

If your project needs a few extra stickers to get the job done ask yourself if you've allowed a few extra as spares? 

We always recommend having 4 - 5 stickers set aside. These can be used as replacements so there's no need to wait, nor place another order!

Simply put, YES!

Because they're made from vinyl, Quadrostyle tile stickers are water-resistant. They’re perfect to use in areas where there's moisture, splashes of water, hot steam, or cooking spills. Any droplets can be wiped away with a damp sponge.

In the kitchen: Install them as a backsplash, behind the kitchen sink, or along the stove wall. We like to add a cotton runner by the sink in case of any spills.

In the bathroom: Install them along your shower wall, on the bathtub surround, or over an acrylic shower. Water droplets will run right off! When used on bathroom floors, it’s a good idea to use a bath mat to avoid slipping on slick vinyl when stepping out of the shower. 

For extra durability in wet rooms like these, we suggest caulking raw edges that sit along the bathtub rim or shower floor. This step, of course, is optional.

NOTE: We don't recommend installing our stickers in poorly ventilated areas, rooms with a high concentration of condensation, or on shower floors where they may sit in water.

Simply put, no. 

Tile panels are printed with grout lines to maintain the look of real tiles, while tile stickers only feature the pattern and no grout lines. As a result, the two products do not align.

It depends on the look you’re going for.

To mimic ceramic tiles: Go for gloss. This will give your stickers a bright, enamel-like sheen, just like real ceramic tiles. Gloss finish also creates bright, vibrant colors. When using gloss stickers, be sure that the surface you intend to cover is perfectly smooth. Gloss wallpaper is more likely to show any irregularities beneath.

To mimic cement tiles: Make it matte. If you love the look of cement tiles or have chosen a design with a weathered, aged, hand-painted effect, matte finish is your best bet. Matte finish renders colors softer and subdued. It’s also slightly more forgiving, making it the best choice for surfaces with slight texture.

It’s not ideal, but yes, you can.

We don’t usually recommend covering up grouted surfaces. Still, we understand that some of you are desperate to improve your outdated bathrooms—even if the results aren’t perfect!

So, if you must, we suggest using our floor panels or 12" tile sticker packs to cover a mosaic tiled floor. To learn more, read our blog article on how to cover up a mosaic tiled floor with Quadrostyle stickers.

You should also choose a bold, busy pattern that will trick the eye and disguise the grout relief that will show through the vinyl stickers. Avoid plain, solid backgrounds, which will only accentuate the grout relief.

If you can make permanent changes to your home, here are some extra steps you can take to prep your floor so that it’s smooth enough for our vinyl stickers:

  • Smooth out the grouted surface with an auto-leveling product
  • Cover the mosaic tiles with vinyl sheeting or adhesive vinyl tiles
  • Paint your floor with tile paint, which will help fill in the ridges and simultaneously seal the porosity of the grout, creating a better base for Quadrostyle tile stickers

Once you’ve succeeded at smoothing out your mosaic floor as much as possible, apply our floor panels over the lot.


Your high school math teacher warned you that your geometry skills were going to come in handy one day. Well, this is what they were talking about!

If you’re planning on using tile stickers to give your existing tiles a facelift, the first thing you’ll need to know is what size to order. 

Here are some all-important tips for measuring your tiles:

  • Do not include grout lines in your measurements. Tile stickers need to be applied directly on top of the tile, not over grout.
  • To ensure the corners don’t peel up, all four sides of each sticker must have 100% contact with the tile face. Do not allow the sticker edge to hang over the grout lines. Tiles that have rounded edges, rounded corners, or irregular edges should be measured a few millimeters shy of the tile edge. Embossed surfaces will give poorer results.
  • Can’t find your size? Unsure how to measure? We know, all these measurements are tedious. To simplify things let us calculate all this for you, We can even custom cut stickers to your exact dimensions.

Tell us more by filling out a custom order inquiry

Yes, of course—the sky’s the limit! You can order extra units via our Samples Page.

Please be sure to measure and calculate your needs so that you order enough for your project. To simplify things, you can head to the Calculate my Order page.

Keep in mind, because each purchase is made to order, new orders may have subtle color differences. Each order is considered a batch, so it is possible that any additional units ordered may not match up to your first order.

We recommend you order over your needs just to have a few extra on hand. Plus, extra stickers are great to have on hand to replace individuals stickers as they get worn out over time.

So you’ve tried using our calculation tool, and you’re still confused about how much to order? Stay zen, there’s no use stressing out over what should be a fun decorating project!


Simply fill out this form with the details of your project, and we’ll do all the calculating for you!

Go for it! But be sure to use a very sharp blade and cut with precision. 

We recommend you place a custom order and let us resize the graphic design, cutting them to your exact tile size. It may cost a little more but, trust us, you’ll be thankful!

You want it, you got it. Just send us your dimensions via a custom order.

Hmm...we do love a challenge. 

Staggered tiles, or tiles laid in a brick formation, cannot be covered using our regular tile stickers. The pattern just won’t align. 

However, we can help! Place a custom order with us, and we'll re-draw the design to suit the staggered layout.

Sometimes you'll need to add more to your first order. Maybe you didn't order enough or perhaps you are renovating in stages. We get it!

Because we print each order on demand each order is considered a batch or a dye lot. Like wallpaper or textiles, there are slight differences in shade and pattern so mixing up orders is not suggested.

We recommend you place your order in one go so all the stickers are printed identically. Be sure you allow for spares.

All purchases are made to order. We require three to five days to print, expertly hand-cut, and carefully wrap your stickers for delivery. 

Delivery times vary by location. To find out how long it may take for your package to arrive, see our guide to Shipping and Returns.

Sunny Bali, baby! 

Our warehouse is based in Indonesia, so unless you’re a local, your order will require international shipping.

Yes! We offer free shipping on orders worth €179 or more! No need to worry about using a promo code—the offer is added automatically.

Learn more about free shipping

You may, depending on where you live. 

Certain countries, such as the EU, UK, and Canada, impose Value Added Tax (VAT) and/or duty to our products when they enter the country. 

These tax fees, plus any additional fees derived from importation, such as processing or brokerage fees, are solely the customer’s responsibility. Please check your country's customs policies before buying an item. We will not be responsible if Customs holds or confiscates certain items.

We’ll keep you updated on your order all along the way!

As soon as your order is ready to leave our office, we’ll send you a shipping notification via email. Open the notification to see the tracking number.

You may also receive an SMS alerts notifying you of the progress of your delivery status.

If you need to discuss the delivery urgently, we recommend you contact the courier directly with your tracking number.

Your order is marked unfulfilled until it has shipped.

An unfulfilled order isn't sitting idly, it's travelling through our production line for printing, laminating, cutting, quality control and expert wrapping before it travels its long international journey to you.

So please don't worry if you are checking on the status of your order and it's marked unfulfilled. This doesn't mean that your order is sitting in our warehouse waiting for a scheduled pickup.

If you have any concerns feel free to contact us for an estimated delivery date.

Making changes to your delivery address is a piece of cake. But the way you’ve got to do it depends on whether or not your order has already shipped. 

To determine whether your order has been shipped, either:

  • check your inbox for a shipping notification 
  • or log into your account to check the shipping status of your order 

If your order has not been shipped yet, please contact us immediately so we can modify your shipping address.

Once an order has been shipped, you must make shipping address changes directly with the courier. You can use the tracking number in the shipping notification email to do so. You should be able to do this with any courier unless your order is already in the final stages of delivery, in which case it is too late.

We want your order to be delivered as securely as possible, so normally, yes. However, you are free to opt-out if you wish!

After receiving your shipping notification, use the tracking number to access your delivery. Once your order has passed through your country’s customs, you can modify the delivery date, delivery address, and request that your order be delivered without a signature.

NOTE: By opting out of a signed delivery, you can no longer make a claim if you have not received your order. We do not recommend unsigned delivery. However, if you must take this action, be sure to instruct the driver to leave it in a safe, dry place.

Unfortunately, no.

Because we require signatures upon receipt for all deliveries, we are unable to ship to P.O. boxes. Please ensure your shipping address is your home or office.

What to return an order? No worries at all—we don’t want you to be anything less than thrilled with your purchase!

Here’s a brief summary of what you need to know about returns:

  • 14-day return policy, no questions asked
  • You must return items in their original packaging to our office in Indonesia.
  • Returns are not possible on samples, custom orders, or stock from our outlet.
  • Return shipping is paid by the client

To submit a return, contact us via email within 14 days of receiving your order. Include your order number and explain why you want to return your order and we’ll do our very best to rectify the situation.

If your order is eligible for a return, we’ll issue an RMA (Return Merchandise Authorization). It may take up to 48 hours to receive this. Returns without an RMA will not be accepted.

Only return only unused stickers. Items that are received damaged will not be refunded. Use the original packing and wrap the goods as you received them to ensure we receive them in a re-sellable condition. 

Also, we ask that you provide a tracking number when you return the goods to us. Without one, we cannot trace it. Once we have received the goods, we will process your refund request. 

NOTE: Custom orders and samples are final—no returns accepted.

After you have shipped your return, please allow three weeks for it to reach us. 

Once we receive your order, we will assess it to verify that it is received in its original condition, undamaged, and can be re-sold. The day after this assessment, we will initiate your refund. 

In the case that the order has been received in poor condition, we will contact you. The cost of any damaged goods will be deducted from your refund.

You will be refunded the cost of the goods minus any initial shipping fees. You will receive an email notification once the refund has been made. Please allow up to 5 days to receive the funds into your account.

Yeah, sure thing! As long as the order is unused and returned to us in new condition you can expect a refund. 

We don’t accept returns on outlet items or samples. Keep in mind that the return charges are at your cost and our office is far away in Indonesia. Check the rates with your local post office to return your order as it's the most economical method.

Learn more about our returns & refunds here 

We do not do exchanges, but if you need to exchange a product, we have a very simple solution for you : just return it and place a new order ! 

Just reach out to us, and, together, we’ll get everything settled. The first step will be to return the goods according to our Return Policy. Kindly note we do not accept returns on custom orders, outlet stock, or samples.

Second step will be to place your new order. 

We are based in Indonesia, so a return label is not available to our international clients. Think of this as an excuse to show off your pretty handwriting!

Where there’s a will, there’s a way!

Have you got a design that you'd like to make into a tile sticker? We can help you with that. Our graphic team loves a challenge and welcomes new projects with excitement. Send us your design using the upload file feature on the custom order inquiry form. We can’t wait to see what you’re dreaming up!

We can take care of that for you. We’re happy to make any color change to our designs, whether you choose one of our colors or you supply your own. 

Color changes do incur a small surcharge, as they require our creative team to create new graphic artwork and run test prints. That is unless you are changing a pattern from color to black and white, which we can do free of charge. 

Send us a customization request

No problem. Whether your tiles are bigger or smaller, we can adapt our patterns to meet your needs. Using large format digital printing, we can create tile stickers as small as from 2" (5 cm) and as large as 48" (120 cm). 

Request a quote

We can create rectangular tile stickers from square patterns by redesigning our patterns to fit your tile size. Rest assured it’ll look as classy as always—we never stretch or skew the pattern. 

First, our graphic designer will study the layout of your tiles using a photo you have supplied. Then, they will create an entirely revised and customized version, equal in beauty to our square stickers.

Share your project details in a custom sticker request

Cleaning Quadrostyle tile stickers is easy. You can vacuum them, sweep over them, and mop them. No need to worry about unpeeling or damaging them!

Wall stickers: Clean tile stickers on your wall using a mild, all-purpose kitchen spray cleaner. Gently wipe down with a sponge.

Floor stickers: Clean your floor stickers using a damp mop and a mild floor cleaner formulated for vinyl or linoleum floors. Stains will not adhere to the laminate coating, so there is no need to scrub the surface. Please do not clean your floor with an abrasive product. 

Do not soak floor stickers in water and do not let them sit in puddles of water.

Moving furniture like chairs and tables around is inevitable. If you don’t take proper measures, this simple act can be quite damaging to your floor stickers. 

It’s important to protect the surface of the vinyl from tearing when moving furniture or appliances. We highly recommend using felt pads or discs on furniture feet to prolong the life of your new floor.

Love our stickers and want to make them a permanent part of your home? We’re flattered! 

All you’ve got to do to seal those babies in is coat your floors with clear epoxy. Read our blog article on sealing in floor stickers to get the step-by-step breakdown.

Remember, this will make them permanent!

Not unless you want to turn your bathroom floor into a slip-n-slide. 

Heat will weaken the adhesive and loosen the stickers, so no, we do not recommend using tile stickers over a heated floor.

That’s a big no-no. Steam is no friend to our stickers. 

A steam cleaner uses far too much heat and will weaken the adhesive, causing them to peel off.

You sure can! 

As long as our stickers have been properly installed, our tile stickers will hold up well with pets in the house. Make sure that all four sides of the sticker grip onto a smooth flat surface. Not even the corners should sit over the tile edge or onto the grout.

Need to refresh a few of your stickers? 

Order individual stickers from our samples library ensuring you select the same design, size and scale as your previous order. 

Important: As each order is printed on demand there is a chance that your first order and subsequent orders will not match identically. This is why we always recommend ordering spares.

Each time we print an order is considered a batch or a lot and subject to dye lot differences, common to printed materials such as wallpaper & textiles.

Changed your mind about an order? We’re sad to see you go, but we totally understand. Please contact us immediately should you need to cancel your order. 

From July 1st, 2020, we have amended our cancellation policy: 

Contact us within 48 hours from the time you place your order, making sure to mention your order number, and we'll refund your order in full. 

After 48 hours have passed, your order will have already been printed. Any order canceled after this point is subject to a 20% restocking fee, excluding shipping charges. 

Express Shipping Orders: If you have placed your order and selected express shipping, the 48-hour delay does not apply to your order. All such orders are subject to a 20% restocking fee, excluding the express shipping charges.

Finally, please note that orders that have already shipped cannot be canceled. Please refer to our Return Policy.

We get it, mistakes happen, especially with so many small variables to consider on your order, like size, scale, quantity—the list goes on! We understand if you’ve made a mistake and need to fix it ASAP.

If your order has yet to be printed, we are happy to accept changes to your order as long as you contact us right away.

After 48 hours, any change to your order is subject to a restocking fee of 20%.

We accept payments via debit card, credit card, or PayPal.

We’re always looking out for you, so rest assured that your financial information is protected with industry-leading security and fraud prevention systems.

Don’t be thrown off—it’s just that our site currency is based in Euro. You might not notice as your shopping because we’ve integrated a location device to automatically detects your local currency. That way, you don't need to worry about currency conversion as you browse.

Once you get to the checkout, though, your cart total will be shown in Euro. During the payment process, your bank will convert the Euro into your local currency at the daily rate.

Finally, once you’ve entered your payment details, you’ll be able to see exactly how much you’ll pay in your local currency. This is the same amount you will find on your bank statement in your local currency.

Yes you can ! 

To pay without a PayPal account, click on the “Pay with Debit or Credit Card” button (at green arrow on example below) and then continue.

Yes, you can!
Want to pay with PayPal? Now you have two options: pay right away or take advantage of PayPal's 4x free payment! All you need is a PayPal account. And once you have registered or logged in, you can choose one of the options below.

1. Pay immediately

As you can see, with this option you can pay for all your purchases immediately from your PayPal account.

2. Pay in 4X

With this new option offered by PayPal, you pay your purchases in 4x and you keep control of your budget... and still have the freedom to indulge yourself. Not bad, right? And in case of payment problems, don't hesitate to contact PayPal's customer service.

You can order tile sticker samples in any size, pattern, or finish you’d like. Just head to the Samples page.

Because our workshop is located in Indonesia, your order, including sample orders, requires international shipping. 

Because you need your samples fast, we use DHL, TNT, and/or FedEx and with a trackable service. That way, your order arrives in perfect condition and on time. 

You may not know this, but the cost of shipping a single sticker can be up to 6 times the price of the sticker sample itself! Yikes, right? Rather than pay high shipping costs for one sample, we've negotiated better rates for a pack of 3.

So when you purchase a Sample Bundle, not only do you get free shipping*, you also get to try out more designs. Think of it as an opportunity to branch out and sample a pattern you might not otherwise have considered. You may end up surprising yourself!

To order a wallpaper sample, go to the product page of the wallpaper you would like to order.

Next, use the drop-down size menu to select the sample size: 12” x 48” (30 cm x 120 cm). This is equivalent to a quarter panel of wallpaper.

Later, if you decide to make a complete order of that wallpaper, the sample piece will align with the full wallpaper panels so that it doesn’t go to waste!

Yes indeed!

USA buyers are eligible for FREE international shipping from our workshop in Indonesia for all our Sample Bundles 

For all other regions we charge a low flat rate handling fee as follows:

Canada CAD $2.95

Australia AUD $4.95

New Zealand NZD $9.00

UK GBP £6.20

Europe €6.95

Singapore FREE

Malaysia MYR 12

Hong Kong HKD 21

Japan JPY 563

Yes, but you’ve got to place a full order of custom stickers first. Let us explain:

When you make a custom order inquiry, we can, upon request, include a set of physical samples to the quotation. This is entirely optional. All custom orders already come with digital samples.

Once the order is paid, we will create a new graphic design. If you have requested physical samples in your order, you will receive these before the main order is printed. Unfortunately, we are unable to make custom samples without a principal order.

Sorry, bud, samples are not returnable for exchange or refund.