Jocasta Stair Riser Stickers
Sometimes it only takes one element to lift the design of a staircase from the pleasant into the sublime. These ornate cement risers stickers create an exotic backdrop, a warm counterpoint to the stair risers.
Colour
The background is cream while the pattern features some aged effects in charcoal grey & taupe giving this design it's characteristic charm.
Removable, Repositionable, Renter Friendly
Thanks to the low tac adhesive our vinyl stair risers peel easily, stick smoothly and removes cleanly.
Easy to cut
Just under 1mm thick our stickers can be trimmed to size with a pair of scissors or a utility knife.
Cleans with ease
The silky, smooth vinyl not only feels great, but you’ll love how easy they are to keep clean.
Non-toxic
No VOCs. Safe for use in home, office and school.
Perfect to use on these surfaces
- Smooth painted dry walls (satin, semi-gloss or gloss finish only)
- melamine cabinets & laminated shelves
- glass splash backs & mirrors
- metal surfaces such as aluminium and stainless steel
- varnished wood
Unsuitable to use on these surfaces
- unsuitable on matte paint drywall -
- unsuitable on textured or rough surfaces
- unsuitable to cover damp walls or cracked paint.
- Unsuitable on raw wood
Thin yet Tough
- High import quality phthalate free PVC vinyl from Italy.
- Thinner than 1mm or 0.04" –
- No grout or caulk required.
- Smooth, soft & durable.
- TIP: Leave them in a warm place for 10 minutes to soften prior to installing.
Adhesive
- Low-tack adhesive backing ensures the wallpaper can be removed easily with no sticky residue.
- Not re-useable. Renter Friendly.
- Hard to remove? Warm the surface for a few seconds with a hairdryer to soften the glue.
Water Resistant
- Perfect as a kitchen or bathroom splash back. Ideal on shower walls or a bath tub surround.
- Resists hot steam from stoves & showers.
Easy to Clean / Easy to Install
- Wipe away stains easily with a general-purpose kitchen or bathroom cleaner.
- Please do not scrub or use harsh, abrasive chemicals.
- No special tools required. No tradesman required.
- Easy, DIY ( do it yourself ) installation.
- Trim with a cutter, razor or sharp scissors.
Heat Resistant / Fade resistant
- The UV laminate coating not only protects from scratches & steam but also fading
- Suitable behind gas, electric & induction cook tops. Please allow 10cm ( 4” ) from the heat source.
- Suitable to decorate the facade of a fireplace.
Do Not...
- Don't mix wallpaper panels or risers with tile stickers, they do not align.
- Don’t install on floors or counter tops, please use our tougher floor panels.
- Don't install on surfaces that get hot to the touch, they'll peel off or melt.
- Don't install on surfaces subject to snow or freezing temperatures, they'll shrink.
- Don't scrub the surface or use harsh or abrasive chemicals when cleaning.
- Don't apply over existing grout, the relief will show through.
- Do not apply over porous or cracked surfaces.
Stair Riser Packs
Designed to cover your stair risers, select the same height as your riser. If you have, for example 8 stair risers and don’t need 2 packs, use the “add one more“ selection to add 2 extra units to your order. You can specify the height of these by leaving a note at the checkout.
- Individually cut adhesive vinyl strips printed with quarter tile squares and grout lines in between.
- The strips can be joined seamlessly to create extra-long lengths.
Pack sizes | 1 pack contains |
5" x 48" (12.70 cm x 120 cm) | 6 units |
5.5" x 48" (14 cm x 120 cm) | 6 units |
6" x 48" (15.20 cm x 120 cm) | 6 units |
6.5" x 48" (16.50 cm x 120 cm) | 6 units |
7" x 48" (17.70 cm x 120 cm) | 6 units |
7.5" x 48" (19 cm x 120 cm) | 6 units |
Add 1 more strip |
1 unit |
How to use our Stair Riser Strips
You will need:
- A general purpose kitchen cleaner & a sponge
- A pencil
- A utility knife or pair of scissors
- A soft cloth
Apply to a clean, dry and non-porous surface. Painted surfaces must be a satin or gloss paint as matte paint repels the adhesive. |
Mark the center of a strip and your stair riser with a pencil. Peel back half of the backing paper to the center mark, align it to the center of the riser & butt the top edge into to stair tread. |
Once the strip is in attached use a cloth to smooth it down & continue until the entire strip is in place.Try not to trap any air bubbles in the vinyl. Press over the edges to ensure a firm adhesion. Butt the vinyl to the staircase edge as best you can. Trim edges with a cutter for perfect fit. |
Repeat steps 2 & 3 until all the risers are in place & the pattern flows uniformly. Leave the new surface to cure 24 hours before returning to normal activity. Do not wash or moisten the strips until 24 hours have past. |
How long does it take to ship my order?We require 3 – 5 days to print, expertly hand-cut & carefully wrap your stickers ready to deliver to your home. See the rates below for delivery transit times. Where do you ship to?We ship to the USA, Canada, UK, Europe, Asia, Australia, New Zealand, North Africa, South America and the Middle East. Swipe left to see our rates. Orders of 139€ or more ship for free. Learn more about free shipping If you don't see your country listed at the checkout, please request a custom shipping rate for you.
Note: USA & Canadian residents that opt for 3-day express shipping please allow up to 48 hr to print, cut & wrap your goods. Kindly note that public holidays may affect these delivery times. Where do you ship from?Our warehouse is based in Bali so most likely your order requires international shipping. Certain countries, such as the EU & Canada, impose Value Added Tax (VAT) and/or duty to our products when they enter. Any additional fees derived from importation, such as taxes, processing or brokerage fees are the customer’s sole responsibility. Please check your country's customs policies before buying an item. We will not be responsible if customs holds or confiscates certain items. What is your Return Policy?We want you to be thrilled with your purchase. If for any reason you are not completely satisfied, just return your tile stickers Contact Us within 14 days of receiving your order. Explain the problem to us and we'll do our very best to rectify the situation.
Return only unused stickers to us and we'll process your refund upon receipt of the goods. Items that are received damaged will not be refunded. Use the original packing and wrap the goods as you received them to ensure we receive them in re-sellable condition. Provide a tracking number when you return the goods to us. Without one we cannot trace it. Custom orders, samples & sale items are final - No returns accepted. |



