Written by Gabrielle Morabia 26/02/2025

Peeling corners on tile stickers can be frustrating, but with the right application methods, you can ensure a seamless, long-lasting look. Quadrostyle tile stickers are designed with a unique adhesive that’s 100% removable—meaning you won’t be left with any sticky residue even after years of use on walls or floors. However, this removable, repositionable quality means that the adhesive isn’t as strong as permanent alternatives. Because of this, proper application is essential, and some surfaces may be incompatible. Testing your surface first is crucial to achieving the best results and ensuring the stickers stick beautifully.

Here’s a quick guide with the most effective tips to help you prevent those pesky corners from lifting.

Solution:

✔️ If tiles have curved edges, avoid applying stickers on those sections.

✔️ Consider custom-sized stickers from Quadrostyle for a better fit.

✔️ Trim excess edges with scissors or a paper cutter.

When the corners of your tile stickers start lifting, re-adhering them carefully can help extend their life and maintain a polished look. Here’s a step-by-step guide using two effective methods:

1. Prep the Corner

Gently Peel Back the Corner: Use a hair dryer for a few seconds to warm up the adhesive area. This softens the sticker, making it easier to lift without damaging it. Clean the Surface: Ensure the tile surface underneath is free from dust, dirt, or any debris that might weaken the bond of the new adhesive.

2. Choose Your Adhesive Method

A) Double-Sided Floor Installation Tape: Cut a small piece of tape to fit just under the corner, ensuring it aligns with the shape of the sticker. Press down firmly to secure.

B) All-Purpose Adhesive: Apply a thin layer of a compatible all-purpose adhesive to the lifted area, taking care not to overapply.

3. Trim and Re-apply

Trim Edges as Needed: Before pressing down the corner, trim any overhanging edges to create a 1 mm gap from the tile edge, reducing future lifting risks.

Press Firmly and Weigh Down: After placing the adhesive, press down the corner and, if possible, place a heavy object (like a book or weight) over the area. Allow it to sit for at least 48 hours to strengthen the bond.

✔️ Reinforces edges in high-traffic areas.

✔️ Prevents water and dust from creeping under corners.

Add a Barrier Layer: To reinforce the tile sticker edges further, apply a thin line of clear silicone along the tile edges and grout lines where the stickers meet. This acts as a waterproof barrier, helping to keep moisture and dust from getting under the corners.

Allow for Full Curing: Follow the silicone’s curing time (typically 24-48 hours) to ensure it sets properly. This layer not only protects but can also help create a longer-lasting seal for tile sticker edges, especially in high-traffic or moisture-prone areas.

This final sealing step can give your tile stickers extra durability and help prevent further lifting issues.

Quadrostyle tile stickers instantly refresh your bathroom floor—without the mess of real tile. Designed to handle moisture and daily splashes, they're the perfect solution for wet rooms!